Naar de inhoud
OneKitly

48 × 23 Estimates Badly and 52 × 19 Estimates Well

Gepubliceerd op 4-11-2026 · 4 min leestijd · Zakelijke tools

Camille Laurent

Camille Laurent — Financieel redacteur bij OneKitly

Belastingen · Persoonlijke financiën

Getoetst aan 2 bronnen

Profiel bekijken →
Kort gezegd

Rounding both factors before multiplying is the standard way to sanity-check a product, and its accuracy depends entirely on the directions of the two roundings. In 48 × 23, rounding 48 up to 50 adds 4.2 % and rounding 23 down to 20 removes 13 % — both errors act on the product in the same direction, and the estimate of 1 000 falls 9.4 % short of the true 1 104. In 52 × 19, rounding 52 down to 50 removes 3.8 % while rounding 19 up to 20 adds 5.3 %, and the two nearly cancel: the same estimate of 1 000 is within 1.2 % of the true 988.

Advertentie

Both round to 50 × 20 = 1 000. The first is 9.4 % off and the second 1.2 %, because in one case the two roundings pull the same way and in the other they cancel.

Round in opposite directions on purpose

The practical rule that falls out of this is worth adopting: when estimating a product, round one factor up and the other down. It costs nothing, it makes the arithmetic no harder, and it converts a potential 10 % error into a likely 1 % one. Division reverses the logic — rounding the numerator up and the denominator up both push the answer in opposite directions, so for a quotient you should round both the same way. Getting this backwards is what makes 950 ÷ 31 estimated as 1 000 ÷ 30 come out 8.8 % high, when rounding both down to 900 ÷ 30 would have given 30 against a true 30.6.

An estimate is a claim about the digits you keep

Estimating to one significant figure claims the answer's leading digit and nothing more, which is exactly right when checking whether a spreadsheet has misplaced a decimal point and useless for checking whether a quote is competitive. The 48 × 23 case shows the limit: 1 000 and 1 104 share no digits at all, so a one-figure estimate cannot even confirm the leading 1. Two figures — 48 × 23 as 48 × 23 rounded to 50 × 23, giving 1 150 — costs one more multiplication and lands within 4 %. Choosing how many figures to keep is the whole of the skill, and keeping one is usually a decision about how much you care rather than how quickly you must answer.

Error
Same estimate, different accuracy
CalculationEstimate and truthError
48 × 231 000 vs 1 1049.4 %
52 × 191 000 vs 9881.2 %
297 × 4112 000 vs 12 1771.5 %
950 ÷ 3133.3 vs 30.68.8 %

Uitgewerkt met onze eigen calculator

Schattingscalculator (afronden)

Gegeven

Eerste getal
24
Tweede getal
12
Bewerking
Optellen (+)

Resultaat

Schatting
30
Exact antwoord
36
Fout
16,67%

Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.

Reken het door met je eigen cijfers →
Advertentie

Veelgestelde vragen

Does the same logic apply to sums?
It applies more gently, because addition does not compound errors the way multiplication does. Rounding 48 and 23 to 50 and 20 gives 70 against a true 71 — an error of 1.4 %, where the same roundings in a product gave 9.4 %. That is because in a sum the absolute errors add, while in a product the relative errors add. So estimating a long column of figures by rounding each is far safer than estimating a chain of multiplications the same way, and the sum of many roundings in mixed directions tends to cancel out further still.
How wrong can a two-factor estimate get?
Roughly the sum of the two relative roundings, and worse when the numbers are small. Rounding 4 to 5 and 3 to 5 is a 25 % and a 67 % error, giving 25 against a true 12 — more than double. The lesson is that the technique needs numbers with enough digits for the leading one to be stable: rounding to one significant figure is reliable in the hundreds and reckless in the units. Whenever the factors are under about twenty, exact arithmetic is fast enough that estimating buys nothing and risks a great deal.

Artikelen die je misschien interesseren

Alle gidsen →

Vergelijkbare tools

Bronnen

Een fout in dit artikel gezien?