Four Shapes, One Input Box, and the Wrong Answer If You Forget Which
Gepubliceerd op 9-11-2026 · 3 min leestijd · Dagelijkse calculators
Marco Bianchi — Redacteur wonen, klussen en auto bij OneKitly
Verbouwen · Materialen
Getoetst aan 2 bronnen
Perimeter is the distance around, and the four common shapes each compute it differently: a rectangle doubles the sum of two sides, a square multiplies one by four, a circle multiplies its radius by 2π, and a triangle adds three sides. Feeding a 10 into each in turn gives 40 for the square and 62.83 for the circle — the same digit describing a side in one case and a radius in the other. The calculator shows its working precisely because that is the step where a wrong shape selection becomes invisible: the answer looks plausible either way and only the working reveals which formula ran.
A 10 entered as a square side gives 40; as a circle radius it gives 62.83. The same number means a different measurement in each of the four modes.
Radius or diameter is the classic slip
Pipes, tubes, wheels and holes are sold and specified by diameter, while nearly every geometric formula wants the radius. Entering a 100 mm pipe as a radius doubles the answer, and the result is still a perfectly ordinary-looking number — which is exactly why the error survives a glance. The safeguard costs nothing: read the label on the input box every time rather than the first time. Where a workshop measures diameters all day, writing the halving into the note rather than doing it in the head removes the step that gets skipped when the phone rings.
Perimeter buys edging and area buys covering
The two are bought in different units and confusing them is expensive in both directions. Fencing, skirting, trim, weld, hemming and edging all scale with perimeter; turf, tiles, paint, plasterboard and flooring all scale with area. Doubling a square's side doubles its fencing bill and quadruples its turf bill, which is why a plot twice as wide costs disproportionately more to surface and disproportionately less to enclose per square metre. Quoting a job needs both numbers, and a supplier who asks only for one is pricing only one part of it.
| Shape | What the 10 means | Perimeter |
|---|---|---|
| Square | A side | 40 |
| Rectangle (10 and 6) | The width | 32 |
| Circle | The radius | 62.83 |
| Triangle (3, 4, 5) | Not used | 12 |
Uitgewerkt met onze eigen calculator
Omtrekcalculator
Gegeven
- Vorm
- Vierkant
- Breedte / zijde / radius / zijde a
- 8
- Hoogte / zijde b
- 6
- Zijde c (alleen driehoek)
- 10
Resultaat
- Omtrek
- 32
Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.
Reken het door met je eigen cijfers →Veelgestelde vragen
- Why does the triangle mode need three numbers?
- Because a triangle's three sides are independent in a way that a rectangle's are not. A rectangle repeats each of its two dimensions twice, so two numbers determine four sides; a triangle has no such repetition and every side must be given. The pattern generalises: a regular polygon of any number of sides needs only one length because they all match, while an irregular one needs every side listed. That is why the separate regular-polygon tool takes a side count and a length, and a general polygon needs a list of coordinates instead.
- Should extra length be added for corners?
- Always, and the amount depends on what is being cut. Mitred trim wastes the offcut at every corner, so a four-corner room needs the perimeter plus roughly one length of the longest piece; fencing wastes nothing at corners but needs a post at each; welded frames need no allowance at all. The perimeter is the theoretical minimum, and every trade has its own habitual margin above it — usually between five and fifteen per cent. A quote built on the bare perimeter will be short, and the shortfall arrives on the last corner of the last day.
Artikelen die je misschien interesseren
Alle gidsen →Vergelijkbare tools
Bronnen
Een fout in dit artikel gezien?