Naar de inhoud
OneKitly

How Many Solar Panels Do I Need? A Simple Sizing Method

Gepubliceerd op 5-1-2026 · 3 min leestijd · Dagelijkse calculators

Marco Bianchi

Marco Bianchi — Redacteur wonen, klussen en auto bij OneKitly

Verbouwen · Materialen

Getoetst aan 2 bronnen

Profiel bekijken →
Kort gezegd

Divide your annual electricity use in kWh by the yearly output of one panel to get the number of panels. One panel's yearly output is its wattage × daily peak-sun hours × 365, adjusted for real-world losses of about 20%. For example, a home using 10,000 kWh a year with 400 W panels and 4.5 peak-sun hours needs roughly 17–19 panels.

Advertentie
Workers installing solar panels on a roof.
Trinh Trần · Pexels · Pexels

Size a solar array from your annual electricity use, panel wattage, and local sun hours — plus a quick payback estimate in dollars.

Start from how much electricity you use

Panel sizing works backward from your consumption, not the roof. The single most important number is your annual electricity use in kilowatt-hours (kWh), which your utility bills report. A typical household lands somewhere between 4,000 and 12,000 kWh a year, depending on home size, heating type, and whether you run air conditioning or charge an electric car.

If you plan to add electric heating or an EV later, size for that future load now — undersizing means you keep buying grid power for the very appliances you added solar to cover.

Peak-sun hours and real-world losses

A panel almost never produces its full rated wattage. Ratings are measured under lab conditions; in the field, heat, shading, wiring, inverter losses, and dust typically cut output by around 20%. To capture this, multiply theoretical output by a performance factor of roughly 0.8.

Peak-sun hours differ widely by location — a sunny southern region may see 5 to 6 hours, while a cloudy northern one sees 3 or less. The same array produces far more in the first than the second, so always use a local figure rather than a national average.

Estimating payback

Payback is the install cost divided by the money the system saves each year. If a system produces 8,000 kWh a year and you'd otherwise pay about $0.17 per kWh, it offsets roughly $1,360 of grid electricity annually. Against a $16,000 installed cost, that's a payback near 12 years — before any tax credits, which can shorten it substantially.

Uitgewerkt met onze eigen calculator

Zonnepanelencalculator

Gegeven

Dagelijks energieverbruik (kWh)
20
Vermogen per paneel (W)
800
Piekzonuren per dag
8

Resultaat

Benodigde panelen
5
Systeemvermogen (kWp)
4

Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.

Reken het door met je eigen cijfers →
Advertentie

Veelgestelde vragen

Do I need to cover 100% of my usage?
Not necessarily. Roof space, budget, and local net-metering rules may make covering 70–90% more cost-effective than chasing the last few percent.
How much roof space does each panel need?
A standard residential panel occupies roughly 18 sq ft. Multiply by your panel count to check whether your roof can physically fit the array.
Does panel wattage change how many I need?
Yes — higher-wattage panels produce more each, so you need fewer of them. That helps when roof space is limited, though higher-output panels often cost more per unit.
Should I add panels for a battery?
A battery stores surplus daytime output for night use but doesn't create energy, so it doesn't change panel count directly. You may add a little capacity to ensure enough surplus to charge it.

Artikelen die je misschien interesseren

Alle gidsen →

Vergelijkbare tools

Bronnen

Een fout in dit artikel gezien?