Naar de inhoud
OneKitly

Slugging Percentage Is Not a Percentage and Tops Out at Four

Gepubliceerd op 23-10-2026 · 3 min leestijd · Sportcalculators

Aisha Karim

Aisha Karim — Redacteur fitness en hardlopen bij OneKitly

Hardlopen · Training

Getoetst aan 2 bronnen

Profiel bekijken →
Kort gezegd

Total bases counts one for a single, two for a double, three for a triple and four for a home run, and slugging is that total divided by at-bats. Fifteen singles, five doubles, two triples and three home runs make 43 bases, which over 100 at-bats gives .430. The leading decimal point is a convention borrowed from batting average and it misleads, because this figure is not bounded by one: a player who homered in all four of their at-bats would read 4.000, and any figure above 1.000 simply means more than one base per trip. Reading it as a percentage of anything is the single commonest error made with it.

Advertentie

15 singles, 5 doubles, 2 triples and 3 home runs in 100 at-bats is 43 total bases and a .430 mark — bases per at-bat, not a share of anything. Four home runs in four at-bats reads 4.000.

The four-to-one weighting is a convention, not a measurement

Counting a home run as exactly four singles is arithmetic on the scoreboard rather than on run production, and the two are not the same thing. Modern run-value measures fit weights to what actually happened over many seasons, and they put a home run appreciably below four singles: a single often advances runners and stays on base to be driven in later, while a home run clears the bases and ends the opportunity. Slugging is nonetheless useful precisely because it needs no fitting — it can be computed from a box score with no reference data at all, and its ranking of hitters agrees with the more careful measures most of the time.

It cannot see a walk at all

A walk does not appear in the numerator and does not count as an at-bat either, so a hitter who draws a hundred walks and a hitter who draws none can have identical slugging figures while contributing very differently. That blind spot is the reason the number is almost always quoted next to on-base percentage, which counts exactly what slugging ignores, and why the two are routinely added together despite measuring per-at-bat and per-plate-appearance quantities that do not belong in the same sum. The combination is not dimensionally respectable and it predicts scoring better than either half — a good reminder that a statistic earns its place empirically.

Total bases
Same 100 at-bats, different distributions
LineTotal basesSlugging
25 singles, nothing else25.250
15 singles, 5 doubles, 2 triples, 3 home runs43.430
10 singles, 5 doubles, 10 home runs60.600

Uitgewerkt met onze eigen calculator

SLG-calculator (slugging percentage)

Gegeven

Enkele honkslagen (1B)
8
Tweehonkslagen (2B)
3
Driehonkslagen (3B)
1
Homeruns (HR)
2
Slagbeurten (AB)
50

Resultaat

Totaal honken (TB)
25

Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.

Reken het door met je eigen cijfers →
Advertentie

Veelgestelde vragen

Why the leading decimal point?
Inherited from batting average, which really is bounded by one and where dropping the leading zero saved space in a printed column. Slugging borrowed the format without borrowing the bound, so the notation quietly asserts something false about the range. In practice nobody is confused by a .430, and everybody has seen a figure over 1.000 in a short sample and had to think for a moment — the convention survives because changing it now would make eighty years of records look wrong.
How many at-bats before the figure means anything?
More than most people assume, and more than batting average needs, because the numerator is lumpier. A single home run adds four bases at once, so a small sample swings by forty points on one swing of the bat, and a hot fortnight can produce a figure no hitter sustains. Season-long totals are the level at which the number settles down enough to compare players, and even there the park, the league and the era move it — which is why serious comparisons use versions adjusted for all three rather than the raw figure.

Artikelen die je misschien interesseren

Alle gidsen →
UitlegOPS Is a Flawed Sum, and Still the Most Useful Number on the CardOPS adds two fractions with different denominators, which as arithmetic is indefensible. It survives because it tracks run scoring far better than batting average and costs nothing to compute — but it underpays on-base ability, and OPS+ does not fix that.VergelijkingTrue Shooting Percentage, and Why Field Goal Percentage MisleadsField goal percentage counts a three-pointer and a layup as the same event and ignores free throws entirely. eFG% fixes the first problem, TS% fixes both — and the ranking of three players changes at every step.UitlegUsage Rate Is Zero-Sum: Five Players Always Add to a Hundred18 shots, 8 free throws and 3 turnovers in 36 minutes gives 29.3 % usage. Five players sharing a team's whole box score get exactly 20 % each — the number is a share, not a skill.UitlegSix Rebounds Can Beat Ten, and the Difference Is the DenominatorTen rebounds in 32 minutes of a game with 82 boards is 18.3 %. Six rebounds in 18 minutes of the same game is 19.5 % — a better rate from a smaller number.UitlegHoe een golfhandicap echt wordt berekend onder het World Handicap SystemDe beste 8 van je laatste 20 Score Differentials, gemiddeld, en geen coëfficiënt 0,96 — die verdween in 2020. Hier is de hele keten van een bruto 92 naar een Course Handicap van 17, met de getallen uitgerekend.HandleidingHow to Calculate Batting Average and What .300 MeansBatting average is hits divided by at-bats. Learn how to calculate it, why a .300 hitter is excellent and what counts as an at-bat in baseball.

Vergelijkbare tools

Bronnen

Een fout in dit artikel gezien?