The Mixing Ratio on a Dye Box Sets the Peroxide, Not the Texture
Gepubliceerd op 19-10-2026 · 4 min leestijd · Dagelijkse calculators
Antonio Delgado — Redacteur tradities en tijdverdrijf bij OneKitly
Symboliek · Kalenders
Getoetst aan 2 bronnen
Split a 120 ml batch at 1:1 and you get 60 ml of colour and 60 ml of developer; at 1:2 the same total becomes 40 and 80. The second number is the one that matters chemically, because the developer is what carries the hydrogen peroxide, and the peroxide is what lifts the existing pigment before the new one is deposited. A developer sold at 9 per cent contributes 4.5 per cent peroxide to a 1:1 mix and 6 per cent to a 1:2 mix — a third more oxidising power from the same two bottles. That is why the ratio is printed on the box rather than left to taste: it is part of the formulation, and changing it changes how much lift the mixture produces.
120 ml at 1:1 is 60 and 60; at 1:2 it is 40 and 80. The developer's share goes from half the mix to two thirds, and so does the peroxide that does the work.
Running out halfway is the expensive mistake
Once colour and developer are combined the reaction starts, and a batch mixed twenty minutes ago is not the same product as a fresh one. That makes the total volume the input worth getting right first: mixing a second batch mid-application means the second half of the head receives a mixture at a different stage of its life from the first half, and the result is a visible line rather than a uniform colour. Estimating generously and discarding the surplus costs a few millilitres; estimating tightly costs a redo. The number scales with hair length and density rather than with head size, which is why the same person needs steadily more of it as the hair grows.
The ratio is not a knob you may turn
Adding extra developer to thin a mixture that feels too thick is the common improvisation, and it does two things at once: it makes the paste runnier, which is what was wanted, and it raises the peroxide fraction, which was not. Going from 1:1 to 1:2 to make the mixture easier to spread also raises the oxidising strength by a third, and the additional lift shows up as a lighter, warmer result than the box promised. A mixture that is genuinely too stiff is more often a sign of the wrong developer strength or an old tube than of a ratio needing adjustment — and the manufacturer's own ratio is the only one their shade chart was built on.
| Ratio | Colour | Developer | Developer share |
|---|---|---|---|
| 2:1 | 80 ml | 40 ml | 33.3 % |
| 1:1 | 60 ml | 60 ml | 50.0 % |
| 1:1.5 | 48 ml | 72 ml | 60.0 % |
| 1:2 | 40 ml | 80 ml | 66.7 % |
Uitgewerkt met onze eigen calculator
Mengcalculator haarverf
Gegeven
- Totale hoeveelheid (ml)
- 120
- Mengverhouding (verf : waterstof)
- 1:1 — Permanent (standaard)
Resultaat
- Verf (ml)
- 60
- Waterstof (ml)
- 60
Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.
Reken het door met je eigen cijfers →Veelgestelde vragen
- Why is developer sold in different strengths?
- Because lifting and depositing are two different jobs and need different amounts of peroxide. A low strength is enough to open the hair and fix a new pigment when the target shade is no lighter than the starting one; going lighter needs more, because the existing pigment has to be destroyed first. The strengths sold are usually labelled both as a percentage and in volumes, which is an older unit measuring how much oxygen the solution can release — the two scales are proportional, so a figure in one converts cleanly to the other, and mixing up the labels is the fastest way to use twice the strength intended.
- Does the ratio work by volume or by weight?
- By volume, which is what the markings on the bowl and the applicator bottle measure, and the calculation here follows that. Weighing is more precise and some professional lines specify it, because a cream and a liquid of the same volume do not have the same mass and a thick colour cream can be denser than the developer it is mixed with. For a home application the difference is smaller than the error in eyeballing the level in a bottle; for a salon repeating a formula across clients, it is not, and a scale is the cheaper path to consistency.
Artikelen die je misschien interesseren
Alle gidsen →Vergelijkbare tools
Bronnen
Een fout in dit artikel gezien?