Naar de inhoud
OneKitly

Koppelcalculator

Bereken het koppel uit een kracht die op een afstand van het draaipunt wordt uitgeoefend (τ = F·d).

Advertentie

Vergelijkbare tools

Alle tools: Natuurkunde →

Koppel (N·m) nodig? De Koppelcalculator leidt dat in één stap uit Kracht (N), Afstand (m) af. Bijvoorbeeld: met Kracht (N) = 50 en Afstand (m) = 0,4 geeft hij Koppel (N·m) = 20.

Zo gebruik je het

  1. Voer je waarden in: Kracht (N), Afstand (m).
  2. Lees het resultaat onmiddellijk: Koppel (N·m).
Advertentie

Veelgestelde vragen

Wat rekent de Koppelcalculator precies uit?

Hij neemt Kracht (N) en Afstand (m) en leidt daar Koppel (N·m) uit af. De berekening loopt live terwijl je typt, dus het resultaat werkt bij elke wijziging bij.

Welke gegevens moet ik opgeven?

2 waarden: Kracht (N) en Afstand (m). Verder is er niets nodig — geen account, geen bestandsupload.

Kun je een uitgewerkt voorbeeld laten zien?

Met Kracht (N) = 50 en Afstand (m) = 0,4 geeft de calculator Koppel (N·m) = 20. Die cijfers komen uit het daadwerkelijk uitvoeren van deze tool, dus je kunt ze reproduceren door dezelfde waarden in te voeren.

Wat gebeurt er als ik grotere waarden invoer?

Het beweegt sterk. Met Kracht (N) = 100 en Afstand (m) = 0,44 in plaats daarvan gaat Koppel (N·m) van 20 naar 44 — en daarom is het de moeite waard een paar scenario’s te toetsen in plaats van op één cijfer te vertrouwen.

Wat geeft het bij kleinere waarden?

Teruggeschaald naar Kracht (N) = 25 en Afstand (m) = 0,36 komt Koppel (N·m) uit op 9. Het is de moeite waard het verband aan beide uiteinden te controleren voordat je op één uitkomst vertrouwt.

Wanneer zou ik dit werkelijk gebruiken?

Een huiswerkantwoord controleren, iets op maat brengen voordat je het bouwt, en een orde van grootte krijgen voordat je je aan een ontwerp vastlegt — een koppel op een bout, de kracht die een veer teruggeeft, de frequentie waarop een schakeling in resonantie komt, hoe lang licht erover doet om aan te komen.

Wat is de meest voorkomende fout?

Een waarde in de verkeerde eenheid invoeren. Natuurkundige formules gaan overal van SI uit, dus grammen in plaats van kilogrammen of centimeters in plaats van meters verschuiven het antwoord met machten van tien, zonder enige waarschuwing.

Wat is het verschil tussen de Koppelcalculator en de Calculator zwaartekracht?

Deze geeft Koppel (N·m); de Calculator zwaartekracht geeft Zwaartekracht (N). Dat is het hele verschil — open die waarvan je het cijfer nodig hebt.

Is er een tool voor de volgende stap?

Calculator verrichte arbeid is de naastliggende na deze: Bereken de arbeid die een kracht over een afstand verricht (W = F·d).

Wat is het nog waard om ernaast open te hebben?

Calculator middelpuntzoekende kracht en Krachtcalculator (F = ma) — ze komen vaak genoeg in dezelfde taak voor om een tweede tabblad waard te zijn.

Verder lezen

Alle gidsen →
UitlegA Door Handle Near the Hinge Would Need Fifteen Times the Push20 N at 75 cm from the hinge is 15 N·m. Move the handle to 5 cm and the same door needs 300 N — the reason no handle is ever fitted near the hinge.UitlegEngine Displacement and Compression Ratio: What They Actually Tell YouBoth numbers are pure geometry — one is the volume a piston sweeps, the other a ratio of two volumes — and both are read as if they described power. Here is each derivation worked on real engines, and exactly what each number can and cannot support.UitlegTightening a Bolt to the Right Torque: Why the Number on the Wrench Is a GuessTorque does not hold a joint together — preload does, and torque is a poor proxy for it. Here is where 90 % of your effort goes, what the K-factor really is, and why the same 37.84 N·m gives anything from 12.61 kN to 37.84 kN of clamping force.HandleidingBelt Length Between Two Pulleys: The Geometry, and Why the Answer Is Not What You OrderTwice the centre distance plus both circumferences is 36 % too long. Here is the real formula, how the two straight runs and the two arcs actually add up, how far the standard approximation drifts, and what to do with a figure that is not a catalogue length.GidsTowing Capacity: the Limit That Stops You FirstThere is no single towing capacity. There are four or five separate limits, and the one that binds is rarely the tow rating on the brochure — it is usually the vehicle's own weight budget, quietly consumed by the people sitting in it.GidsGear Ratios, and Why Your Speedometer Lies After New TyresEngine rpm reaches the road through one unbroken multiplication chain, and the last link is the tyre. Change the tyre's rolling circumference and the speedometer goes wrong by exactly that percentage — in a direction the law cares about.
Advertentie