Skip to content
OneKitly

Borrowing Twice as Much Cuts Your Safety Margin by Eight

Published 11/6/2026 · 3 min read · Finance calculators

Camille Laurent

Camille Laurent — Finance writer at OneKitly

Tax · Personal finance

Checked against 2 sources

View profile →
In short

A collateralised loan is liquidated when the debt reaches a set fraction of the collateral's value — 80 % in this example. Borrowing $4 000 against $10 000 puts the ratio at 40 %, giving a health factor of 2.0 and room for the collateral to fall by half before the threshold is reached. Borrow $6 000 instead and the ratio is 60 %, the health factor 1.33, and the survivable fall is 25 %. At $7 500 the ratio is 75 %, the health factor 1.07, and a drop of 6.25 % triggers liquidation. The debt rose by 88 % from the first case to the last; the safety margin fell by 88 % of itself, from 50 points to 6.

Advertisement

$4 000 against $10 000 of collateral survives a 50 % fall. $7 500 against the same collateral survives 6.25 %. The borrowing not quite doubled; the buffer fell eightfold.

Interest raises the ratio while you sleep

The debt is not static. At 6 % a year on $4 000, interest adds $240 over twelve months, which lifts the ratio from 40 % to 42.4 % with the collateral entirely unchanged. On a position already close to the threshold that drift alone can trigger liquidation: a loan at 78 % against an 80 % limit is two points from the edge and will cross it in a matter of weeks at typical rates, with nothing happening in the market at all. Rates on these facilities are also variable and rise when borrowing demand rises, which tends to be exactly when collateral values are falling.

Liquidation is not a sale at the threshold price

When the threshold is crossed, the collateral is sold by an automated process that also charges a penalty, commonly between five and fifteen per cent of the amount liquidated. That penalty comes out of the borrower's remaining equity, so a position liquidated at the limit returns noticeably less than the arithmetic of the ratio suggests. Liquidations also cluster: a falling market pushes many positions over their thresholds at once, and the resulting forced selling drives the price down further, which triggers more. Anyone relying on being able to add collateral in time should assume the network will be congested at precisely that moment.

Fall before liquidation
Same collateral, three loan sizes
BorrowedRatio and healthFall before liquidation
$4 00040 %, 2.0050 %
$6 00060 %, 1.3325 %
$7 50075 %, 1.076.25 %

Worked with our own calculator

Crypto lending / borrowing calculator

Given

Collateral value
$20,000.00
Amount borrowed
$8,000.00
Liquidation threshold (LTV %)
160
Borrow APR (%)
6.6

Result

Current LTV
40%
Health factor
4
Max collateral drop
75%
Still borrowable
$24,000.00
Yearly interest
$528.00

These figures are produced by the calculator below, not typed in by hand — they are recomputed whenever the tool changes.

Run it on your own figures →
Advertisement

Frequently asked questions

What does a health factor of 1.07 actually mean?
That the collateral is 7 % above the level at which the position is closed. The factor is the liquidation threshold divided by the current ratio, so it reaches 1.00 exactly at the moment of liquidation and rises as the position becomes safer. Reading it as a percentage of remaining safety is the intuitive shortcut, and it works because a factor of 2.00 does correspond to a 50 % permitted fall. Below about 1.2 the number becomes a poor guide to how much time remains, because it moves faster than most people check it — the collateral only has to slip a few per cent.
Is there a ratio that is safe?
Not in the sense of eliminating the risk, only in the sense of choosing how much of it to carry. A ratio of 20 % survives a 75 % fall, which is larger than most single-day moves in any asset but smaller than several historical drawdowns in volatile ones. The question a borrower has to answer is what fall they are willing to be wrong about, and the honest way to set the number is to look at the worst decline the collateral has actually had rather than the worst they expect. Borrowing at all against a volatile asset is a bet that the asset falls less than the threshold allows, and no ratio makes that bet disappear.

Articles you may find interesting

All guides →
ExplainerWhat Is a Funding Rate? The Recurring Cost of Holding a PerpetualFunding is paid every eight hours on the full notional, between traders rather than to the exchange. A rate of 0.01 percent looks like nothing and costs 10.95 percent a year. Here is the formula and an annualised table.How-toHow to Calculate Your Liquidation Price on a Leveraged PositionThe liquidation price follows directly from your leverage: at 10x a 10 percent move wipes you out. Here is the formula, the maintenance margin that moves it closer, and how to read the number before you open.GuideWhere to Set a Stop-Loss and a Take-ProfitThe stop goes where your idea is wrong, not where your comfort runs out — and then the position size adapts to it. Here is the volatility argument, the sizing arithmetic, and the win rate each reward multiple demands.ExplainerWhat Is Dollar-Cost Averaging? A Simple Guide for InvestorsDollar-cost averaging means investing a fixed amount at regular intervals. Learn how it smooths out market volatility and removes the guesswork of timing.ExplainerLeverage, Liquidation, and the Asymmetry of LossesLiquidation distance is (1 ÷ L − m) ÷ (1 − m): at 20× that is 2.56 percent on a 2.5 percent maintenance margin, inside a normal day. Recovering a loss needs 1 ÷ (1 − L) − 1, so 90 percent lost needs 900 percent back. Combined, repeated leveraged bets on a market with a genuine +0.08 percent edge compound at −1.23 percent per period at 10×.GuideBorrowing for the Business: What the Bank Looks At Before the RateThe coverage ratio is the gate, the guarantee is the second price and the rate is an output. On a 400,000 loan, cutting the rate by a full point moves the coverage ratio by 0.018 — while two extra years of term move it by 0.216. The whole negotiation is in the wrong place.

Related tools

Sources

Spotted a mistake in this article?