A Lego House 30 by 20 Centimetres Takes 512 Bricks of Wall
Gepubliceerd op 19-11-2026 · 3 min leestijd · Dagelijkse calculators
Marco Bianchi — Redacteur wonen, klussen en auto bij OneKitly
Verbouwen · Materialen
Getoetst aan 2 bronnen
A standard eight-stud brick is 31.8 mm long and 9.6 mm tall, so a wall is counted in two directions at once. A footprint of 30 by 20 centimetres has a perimeter of 100 cm, which needs 32 bricks laid end to end per course. A wall 15 cm high needs 16 courses, since each brick adds 9.6 mm. Multiplying gives 512 bricks for the walls alone, before any roof, floor, door or window. The number surprises people because a brick feels small and a wall is two dimensions of them.
Sixteen courses of 32 standard bricks each. The count comes from the perimeter divided by brick length and the height divided by 9.6 mm, and both round upward.
Three plates make a brick, and that is the whole system
The brick height of 9.6 mm is exactly three times the plate height of 3.2 mm, which is also the stud spacing. That single ratio is why any wall built from bricks can be matched by plates, why sloped and tiled pieces align, and why a design can be scaled without gaps. Anyone building to a target height should pick a multiple of 9.6 mm rather than a round number of centimetres — 14.4 cm is fifteen courses exactly, while 15 cm forces a partial course that has to be fudged with plates.
Overlapping joints doubles the thinking, not the count
A wall built with every joint in the same place is a stack of columns and falls apart; staggering them by half a brick is what makes it a wall. The staggering does not change the total, since each course still covers the same perimeter, but it does mean alternate courses need a half-length brick at the corner. Builders in clay solved this centuries ago with the same trick and the same half-brick, which is why a Lego wall and a garden wall share a bond pattern.
| Step | Calculation | Result |
|---|---|---|
| Perimeter | 2 × (30 + 20) | 100 cm |
| Bricks per course | 100 ÷ 3.18 | 32 |
| Courses | 15 ÷ 0.96 | 16 |
Uitgewerkt met onze eigen calculator
LEGO-steentjescalculator (huis)
Gegeven
- Lengte van het grondvlak (cm)
- 60
- Breedte van het grondvlak (cm)
- 40
- Hoogte van de muur (cm)
- 30
Resultaat
- Lagen (rijen hoog)
- 32
- Steentjes per laag
- 63
- Totaal 2×4-steentjes
- 2.016
Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.
Reken het door met je eigen cijfers →Veelgestelde vragen
- How much would 512 bricks weigh?
- Around 1.2 kilograms, since a standard eight-stud brick is about 2.3 grams. That is a useful check on a parts order, because sellers of loose bricks price and ship by weight rather than by count. A kilogram of mixed bricks is roughly four hundred pieces, so a wall of this size is between one and two kilograms depending on how many small pieces sneak in.
- Does the roof need as many pieces as the walls?
- Fewer pieces and more different ones. A flat roof over 30 by 20 centimetres is 600 square centimetres, which a handful of large plates cover in a dozen parts. A pitched roof needs slope pieces in matching angles, ridge tiles and end caps, and the part count stays low while the shopping list gets long. That asymmetry is why walls are the cheap part of a model and roofs are where a build stalls waiting for one specific piece.
Artikelen die je misschien interesseren
Alle gidsen →Vergelijkbare tools
Bronnen
Een fout in dit artikel gezien?