Naar de inhoud
OneKitly

How Many Tiles Do You Need? (Floor and Wall)

Gepubliceerd op 31-10-2025 · 3 min leestijd · Dagelijkse calculators

Marco Bianchi

Marco Bianchi — Redacteur wonen, klussen en auto bij OneKitly

Verbouwen · Materialen

Getoetst aan 2 bronnen

Profiel bekijken →
Kort gezegd

Divide the area to tile by the area of one tile, then add about 10% for cuts and breakages. To tile a 12 m² floor with 30 × 30 cm tiles (0.09 m² each): 12 ÷ 0.09 = 134 tiles, plus 10% ≈ 148, rounded up to full boxes. Add more waste — up to 15% — for diagonal layouts or busy patterns.

Advertentie
A mosaic of small red and green tiles with the grout lines showing.
Jan van der Wolf · Pexels · Pexels

Estimate tiles from the area to cover and one tile's size, then add for cuts and waste. Here's the method, with an example and the 10% rule.

Start with the area to cover

Measure length by width to get the area in square metres. Tile a 4 × 3 m floor and you have 12 m². For walls, measure each wall the same way and add them up. Subtract only large permanent gaps — a full doorway on a wall, say; small openings are absorbed by the waste margin.

Advertentie

Divide by one tile's size

Convert the tile's dimensions to metres and multiply them for its area — a 30 × 30 cm tile is 0.30 × 0.30 = 0.09 m². Divide the surface by that: 12 m² ÷ 0.09 = 134 tiles before any waste. Larger tiles mean fewer pieces but more cutting waste at the edges, so the format changes both the count and the offcut margin.

Add for cuts and breakages

Edges never divide evenly, so you cut tiles and lose the offcuts, and a few break during handling. Add 10% for a simple straight layout, and 15% for diagonal or patterned work, where cuts are more frequent and less reusable. Small, awkward rooms with lots of edges can need even more.

Buy by the box, keep spares

Tiles are sold in boxes covering a set area, so round your total up to whole boxes. Buy from a single production batch, since colour can vary slightly between batches, and keep a few spare tiles from it. A cracked tile years later is easy to replace only if the spare matches — the same batch is your insurance.

Uitgewerkt met onze eigen calculator

Tegelcalculator

Gegeven

Oppervlak (m²)
20
Breedte van de tegel (cm)
30
Hoogte van de tegel (cm)
30
Snijverlies (%)
10

Resultaat

Benodigde tegels
245
Oppervlak met snijverlies (m²)
22

Deze cijfers komen uit de calculator hieronder, ze zijn niet met de hand ingetypt — ze worden opnieuw berekend telkens als de tool verandert.

Reken het door met je eigen cijfers →
Advertentie

Veelgestelde vragen

How much extra should I add for waste?
Add 10% for a simple straight layout, up to 15% for diagonal or patterned work, and more for small rooms with many cut edges.
Should I subtract doors and fixtures?
Only subtract large permanent features. Small openings are covered by the waste margin, and leaving them in gives a safer buffer.
Why buy tiles from the same batch?
Colour and size can vary slightly between production batches, so a later top-up from a different batch may not match your floor or wall.

Artikelen die je misschien interesseren

Alle gidsen →

Vergelijkbare tools

Bronnen

Een fout in dit artikel gezien?