A Hundred-Sided Polygon Is a Circle to Three Decimal Places
Published 11/10/2026 · 3 min read · Everyday calculators
Lena Hoffmann — Science & education writer at OneKitly
Mathematics · Physics
Checked against 2 sources
Give the tool a hundred sides of length 1 and it reports an area of 795.51, an interior angle of 176.4°, an apothem of 15.910 and a circumradius of 15.918. The circle with the same 100 of perimeter has an area of 795.77 — the polygon falls short by three parts in ten thousand. The two radii, which measure the distance to the middle of a side and to a corner, differ by less than a twentieth of a per cent, and at that point the distinction has no practical meaning. The shape is a circle for every purpose except the count of its 4 850 diagonals.
Its area is 795.51 against a circle's 795.77 for the same perimeter — a gap of 0.03 %. Its inner and outer radii agree to within a twentieth of a per cent.
This is how π was first computed
Archimedes trapped the circle between an inscribed and a circumscribed polygon and doubled the side count until the two closed on each other. At 96 sides he had π between 3.1408 and 3.1429, which is correct to two decimal places and was the best value available for eight centuries. The method needs no more than square roots and patience, and it gets better without limit — every doubling of the side count roughly quarters the gap. Later mathematicians pushed it to thousands of sides by hand, one of them dying before publishing a value that took twenty years to compute.
Where the polygon is chosen on purpose
Every curve a machine draws is a polygon at some resolution. A circle in a vector file is stored as a handful of arcs and rendered as line segments short enough that the eye stops noticing; a milled circular pocket is cut as a sequence of straight moves whose length is set by the tolerance. Choosing the side count is therefore a real engineering decision, trading file size and machining time against a deviation that is usually specified in microns. The hundred-sided figure here would be indistinguishable from a circle at any scale a person handles.
| Sides | Interior angle | Area for perimeter 100 |
|---|---|---|
| 3 | 60° | 481.13 |
| 8 | 135° | 754.44 |
| 100 | 176.4° | 795.51 |
| Circle | — | 795.77 |
Worked with our own calculator
Regular polygon calculator
Given
- Number of sides (n)
- 3
- Side length (s)
- 5
Result
- Area
- 10.825
- Perimeter
- 15
- Interior angle
- 60 °
- Exterior angle
- 120 °
- Sum of interior angles
- 180 °
- Apothem (inradius)
- 1.443
- Circumradius
- 2.887
- Number of diagonals
- 0
These figures are produced by the calculator below, not typed in by hand — they are recomputed whenever the tool changes.
Run it on your own figures →Frequently asked questions
- Why does a hundred-sided figure have 4 850 diagonals?
- Because each of the hundred corners connects to the ninety-seven that are neither itself nor its two neighbours, and every diagonal gets counted twice that way. A hundred times ninety-seven, halved, is 4 850. The count grows with the square of the side count while the perimeter grows linearly, which is why a shape that looks smoother and smoother is also getting combinatorially more complicated — a fact that matters to anyone triangulating a polygon in software rather than looking at one.
- What is the apothem for?
- It is the height of each of the triangles that make up the polygon, so the area is simply half the perimeter times the apothem — the same half-base-times-height in disguise. It is also the practical measurement for anything that has to fit inside a hole: a hexagonal nut is specified across the flats, which is twice the apothem, because that is the dimension a spanner grips. Buying by the corner-to-corner distance instead gives a nut that does not fit the tool, and the two differ by 15 % on a hexagon.
Articles you may find interesting
All guides →Related tools
Sources
Spotted a mistake in this article?