Skip to content
OneKitly

A Pyramid Holds a Third of the Box It Fits Inside

Published 11/9/2026 · 3 min read · Everyday calculators

Antonio Delgado

Antonio Delgado — Traditions & pastimes writer at OneKitly

Symbolism · Calendars

Checked against 2 sources

View profile →
In short

The volume of a square pyramid is the base area times the height, divided by three. A base side of 10 and a height of 12 gives 10 × 10 × 12 ÷ 3 = 400, exactly a third of the 1 200 that the enclosing box would hold. Apply it to the Great Pyramid — a base of 230.4 m and an original height of 146.6 m — and the answer is 2 594 046 cubic metres, which is the figure quoted in every survey of the monument. A solid cube of the same volume would measure 137.4 m on each edge.

Advertisement

A base of 10 and a height of 12 gives 400, not 1 200. The Great Pyramid at Giza works out at 2.594 million cubic metres by the same one line.

Three pyramids fill a cube, and you can see it

Take a cube and join its centre to all eight corners: the result is six identical pyramids, each with a face of the cube as its base and half the cube's edge as its height. Six pyramids of half-height fill the cube, which is the same statement as three of full height doing so — and it is why the third appears without any calculus being needed. The demonstration survives in wooden puzzle sets sold for classrooms, where three identical pyramids assemble into a cube and settle the question by hand in about four seconds.

Which height, and why it matters at Giza

The formula wants the vertical height from base to apex, not the slope length up the face. At Giza those differ substantially: the vertical height was 146.6 m while the sloping face measures about 186 m, and using the second in place of the first inflates the volume by more than a quarter. The distinction matters for the same reason it does on a roof — the tape naturally lies along the slope, and the number the formula needs is the one nobody can measure directly. Modern figures for the monument come from theodolite survey of the corners and apex, not from anyone climbing it with a rule.

Pyramid
Pyramid against its bounding box
Base and heightPyramidBox
10 and 124001 200
100 and 1240 000120 000
230.4 m and 146.6 m2 594 046 m³7 782 138 m³

Worked with our own calculator

Pyramid volume calculator

Given

Base side
6
Height
10

Result

Volume
120

These figures are produced by the calculator below, not typed in by hand — they are recomputed whenever the tool changes.

Run it on your own figures →
Advertisement

Frequently asked questions

Does the third apply to cones as well?
It applies to every shape that tapers to a point from a flat base, whatever the base looks like. A cone is a pyramid with a circular base and takes a third of its cylinder; a pyramid on a hexagonal base takes a third of its prism. The rule is completely general because it depends only on the cross-section shrinking as the square of the distance from the apex, which is true for any straight-sided taper. The same reasoning gives a quarter for a shape tapering in four dimensions, which is of no use to anyone but confirms the pattern.
How much stone is actually in the Great Pyramid?
Less than the formula suggests, and nobody knows how much less. The geometric volume of 2.594 million cubic metres counts the chambers, the passages and the natural rock outcrop the builders incorporated at the base rather than cutting away — estimates for that outcrop run from a few per cent to nearly a quarter of the lower courses. The commonly quoted block count of around 2.3 million assumes an average block volume that is itself an estimate. The geometry is exact and the archaeology is not, which is the usual relationship between a formula and the object it describes.

Articles you may find interesting

All guides →

Related tools

Sources

Spotted a mistake in this article?