Over 111 Kilometres, the Curve and the Straight Line Differ by 1.4 Metres
Published 11/2/2026 · 3 min read · Everyday calculators
Lena Hoffmann — Science & education writer at OneKitly
Mathematics · Physics
Checked against 2 sources
Arc length is the radius times the angle in radians, which is why the formula looks so bare: at a radius of 5 and an angle of 45°, the arc is 3.927 and the straight chord across it is 3.827 — a visible difference of 2.6 %. Scale the same 1° of angle up to the Earth's radius of 6 371 km and the arc measures 111.195 km while the chord measures 111.194 km. The gap is 1.4 m over a distance of 111 km, which is roughly one part in eighty thousand and smaller than the width of most roads. That is the quantitative version of the everyday observation that the ground looks flat.
One degree of latitude spans an arc of 111.195 km and a chord of 111.194 km. The Earth is big enough that a degree of it is almost flat.
Where the number 57.3 comes from
Set the arc equal to the radius and the angle that results is one radian: 57.29578 degrees. The unit is defined by that equality rather than by dividing a circle into a convenient number of parts, which is why it produces a formula with no conversion factor in it — arc equals radius times angle, full stop. Degrees need a factor of π over 180 wherever they appear, a nuisance that has caused more sign and scale errors in engineering code than almost anything else. The radian's awkward decimal is the price of the formula's simplicity, and it is a price worth paying anywhere the same angle is used more than once.
Why a degree of latitude is a useful ruler
Every degree of latitude is the same length, because meridians are all great circles of the same radius: 111.2 km from one to the next, wherever you are. A minute of latitude is therefore 1.853 km, which is where the nautical mile comes from — it was defined as exactly that, so that a navigator could read distance directly off the latitude scale at the side of a chart without any multiplication. Longitude gives no such gift: its degrees shrink from 111.2 km at the equator to nothing at the poles, which is why the same chart's horizontal scale cannot be used for distance and why so many navigation errors involve reading the wrong edge.
| Radius | Arc | Arc minus chord |
|---|---|---|
| 1 m | 17.45 mm | 0.0002 mm |
| 100 m | 1.745 m | 0.022 mm |
| 6 371 km (Earth) | 111.195 km | 1.4 m |
| Same, over 45° | 5 004 km | 128 km |
Worked with our own calculator
Arc length calculator
Given
- Find
- Radius (from arc & angle)
- Radius (r)
- 10
- Central angle (θ)
- 90
- Angle unit
- Radians
- Arc length (for reverse modes)
- 7.854
Result
- Result
- 0.087
- Sector area
- 0.343
- Chord length
- 0.149
These figures are produced by the calculator below, not typed in by hand — they are recomputed whenever the tool changes.
Run it on your own figures →Frequently asked questions
- When does the chord become a bad approximation?
- Around a few degrees, and it degrades quickly after that. At 1° the chord is short by one part in eighty thousand; at 10° by one part in eight hundred; at 45° by 2.6 %, which on an Earth-sized radius is 128 km of missing distance. The rule of thumb is that the error grows with the square of the angle, so halving the angle quarters the error. That is why aviation and shipping treat legs under a few hundred kilometres as straight lines and switch to great-circle arithmetic beyond, rather than because any particular threshold is written into the physics.
- Does the sector area follow the same pattern?
- It follows a related one, scaled by the radius rather than proportional to it. The sector cut by a 45° angle at radius 5 has an area of 9.817 — half the arc times the radius, which is the same relationship a triangle has between base and height. Because the radius appears twice, doubling it quadruples the sector while only doubling the arc. That difference is why a pizza slice of twice the radius feeds four people rather than two, and why the wider the wedge the more its area is concentrated at the outer edge.
Articles you may find interesting
All guides →Related tools
Sources
Spotted a mistake in this article?