Skip to content
OneKitly
Sign up · Sign in

Price per square meter calculator

Price per square metre and per square foot, from a total price and a surface — with the garage or the land taken back out.

Related tools

All Buying tools →
FHA loan calculatorEstimate the payment on an FHA-insured mortgage. It applies the minimum down payment for your credit score (3.5% at 580+, 10% at 500–579), finances the 1.75% upfront mortgage insurance premium (UFMIP), adds the monthly annual MIP, and totals principal, interest and insurance — plus optional taxes, home insurance and HOA.Land loan calculatorWork out the payment on a land or lot loan. Enter the price, a down payment (percent or amount), the rate and the term, and optionally a balloon: the payment amortises over the full term while the calculator shows the balance still owed when the balloon comes due. Raw land usually carries higher rates and larger down payments than improved lots.Parking ratio calculatorThe parking ratio of a commercial property, on both conventions at once: spaces per 1,000 ft² of leasable area — the figure US tenants and lenders compare — and spaces per 100 m², the way the same car park is described in Europe. They are not interchangeable: 1,000 ft² is 92.903 m², so 4 spaces per 1,000 ft² is 4.31 per 100 m². Enter the spaces and the floor area in your own unit; both ratios and the area served by each space come out together.PMI calculator (private mortgage insurance)Private mortgage insurance is charged when you put down less than 20%. From the price, down payment, term and rate the calculator finds your loan-to-value, estimates the annual PMI rate (or uses yours), and shows the monthly PMI, when it should drop off at 78% LTV, and the total PMI you'll pay until then.Renovation cost calculatorBuild a renovation budget from your own quoted price per m² — or per ft²: the surface and the price follow the same choice — with contingency, professional fees and VAT.HELOC calculatorSize a home equity line of credit. From your home value and mortgage balance it shows the equity you can borrow against at a target combined loan-to-value, then computes the draw-period and repayment-period payments — interest-only or full principal-and-interest during the draw — plus the total interest.Cap rate calculatorCompute the capitalization rate of a rental property, and compare it with the market rate of your own comparable sales.Down payment calculatorWork out your down payment, the loan it leaves, the cash you still have to find and the month you get there.

Enter Total price, Area (m²), Value of parking, garage or land to exclude and the Price per square meter calculator works out Price per m², Price per ft², Price per m² of living space alone straight away. For instance, with Total price = $300,000.00, Area (m²) = 75 and Value of parking, garage or land to exclude = $0.00 it returns Price per m² = $4,000.00, Price per ft² = $371.61 and Price per m² of living space alone = $4,000.00.

How to use it

  1. Enter your values: Total price, Area (m²), Value of parking, garage or land to exclude.
  2. Read the result instantly: Price per m², Price per ft², Price per m² of living space alone.

Frequently asked questions

How does the Price per square meter calculator work?

It takes Total price, Area (m²) and Value of parking, garage or land to exclude and derives Price per m², Price per ft² and Price per m² of living space alone from them. The calculation is live as you type, so the result updates on every change.

Which values does the calculator ask for?

3 values: Total price ($), Area (m²) and Value of parking, garage or land to exclude ($). Nothing else is required — no account, no file upload.

What does a typical calculation look like?

With Total price = $300,000.00, Area (m²) = 75 and Value of parking, garage or land to exclude = $0.00, the calculator returns Price per m² = $4,000.00, Price per ft² = $371.61 and Price per m² of living space alone = $4,000.00. Those figures come from running this exact tool, so you can reproduce them by entering the same values.

How much does the result change with different inputs?

It moves a lot. Using Total price = $600,000.00, Area (m²) = 83 and Value of parking, garage or land to exclude = $5.00 instead, Price per m² goes from $4,000.00 to $7,228.92 — which is why it is worth testing a few scenarios rather than trusting a single figure.

What does it give for smaller values?

Scaled down to Total price = $150,000.00, Area (m²) = 68 and Value of parking, garage or land to exclude = $1.00, Price per m² comes out at $2,205.88. The relationship is worth checking at both ends before you rely on a single result.

When would I actually use this?

Before making an offer: what the bank will lend, what the purchase costs on top of the price, and how much deposit closes the gap.

What is the most common mistake?

Budgeting for the price and forgetting the acquisition costs. Notary fees, transfer duty and registration add between 2% and 15% depending on the country — enough to sink an offer.

What is the difference between the Price per square meter calculator and the FHA loan calculator?

This one returns Price per m² and Price per ft²; the FHA loan calculator returns Minimum down payment required and Base loan amount. That is the whole difference — open the one whose figure you need.

Is there a tool for the next step?

Land loan calculator is the closest one after this: Work out the payment on a land or lot loan. Enter the price, a down payment (percent or amount), the rate and the term, and optionally a balloon: the payment amortises over the full term while the calculator shows the balance still owed when the balloon comes due. Raw land usually carries higher rates and larger down payments than improved lots.

What else is worth having open alongside it?

Parking ratio calculator and PMI calculator (private mortgage insurance) — they come up in the same task often enough to be worth a second tab.

Further reading

All guides →
How-toHow to Compare Price Per Square Foot Without Comparing Two Different ThingsThe division takes a second; the trap is the area. A listing that looks 6 percent cheaper per square foot turns out to be 17 percent more expensive once both are measured the same way.GuideHow to Budget a Home Renovation Without a Single Made-Up NumberThere is no honest single figure for a renovation. Build it up by work type, accept that labour is the biggest and least predictable line, and hold 10 to 20 percent back for what the survey could not see.ExplainerHow Notary Fees Are Calculated When Buying in EuropeMost of what buyers call notary fees is tax, not the notary. Here is the breakdown on a EUR 250,000 purchase and why an older home costs three times more to transfer than a new one.How-toHow to Split Rent Fairly Between RoommatesThree fair ways to split rent — equally, by room size, or by income — with worked examples so nobody feels shortchanged.How-toHow to Calculate Rental Yield (Gross vs Net)How to calculate rental yield: the gross formula (annual rent ÷ price), the net version after costs, and what counts as a good yield.ComparisonSelling a Second Home: Only One of These Three Countries Rewards Holding ItFrance tapers the tax on a property gain to zero over twenty-two and then thirty years. Spain does not taper at all for anything bought after 1994. Portugal has no taper either — it has an inflation index and a fifty per cent haircut, which is a different animal entirely.